56
English
P/T Function Setting
Attention
:
Pattern’s record will start from the time
when the dome exits the main menu to
the time when “Save Pattern” disappears.
And the tracks will be saved during this
time.
●
Run Pattern 1
：
Remarks
：
All the pattern running methods are the same, so we take “Run Pattern 1” as
Example.
)
Operating method as follows:
1
、
Move the cursor to choose
【
Pan
】
. Press
【
OPEN
】
key (open
the iris order) for confirmation, enter into “P/T Function
Setting Items”
2
、
Move the cursor to choose
【
Run Pattern 1
】
in the
【
Pattern
】
. Press
【
OPEN
】
key (open the iris order) for
confirmation, enter into “Run Pattern 1 ” At this time, the dome
will exit the main menu and enter into Pattern 1 Running
Condition and the words “Run Pattern” will appears on the
screen’s left upwards.
3
、
After exiting the main menu, the dome will be running
repeatedly according to former saved pattern 1 autoly.
4
、
Pattern1 will be stopped to carry out a new order while receiving
any effective order, and the words “Run Pattern” will disappear.
Remarks
：
All the pattern running methods are the same,
if you want to rerun a new pattern, you can
just repeate the above steps from 1-6.
Attention
：
During the running, the words “Run
Pattern” will appear on the left-up
wards screen. When running
certain pattern, be sure that you
have saved the corresponding track,
or you will receive no response.
P/T Function Setting
Patrol Setting
Track Running
Save Pattern
Setup Pattern 1
Setup Pattern 2
Setup Pattern 3
↓
Run Pattern 1
Run Pattern 2
Run Pattern 3
Run Pattern
Current Recording Situation
↓
Pattern
▽
Patrol
▽
Scan
▽
Home place
Auto flip On
Tilt Max speed 110
Pan Max speed 120
Preset speed 124
