background image

2

3

© 2012 Q-See.

 Reproduction in whole or in part without written permission is prohibited. All rights 

reserved. This manual and software and hardware described herein, in whole or in part, may not be 

reproduced, translated, or reduced to any machine-readable form without prior written approval.

Trademarks:

 All brand names and products are trademarks or registered trademarks of their 

respective owners.

Q-See

 is a registered trademark of DPS, Inc.

Disclaimer:

 The information in this document is subject to change without notice. The 

manufacturer makes no representations or warranties, either express or implied, of any kind with 

respect to  completeness of its contents.

Manufacturer shall not be liable for any damages whatsoever from misuse of this product.

Thank You for Choosing a Q-See Product!

All of our products are backed by a conditional service warranty covering all hardware for 12 months 
from the date of purchase.  Additionally, our products also come with a free exchange policy that 
covers all manufacturing defects for one month from the date of purchase. Permanent upgrading 
service is provided for the software and is available at www.Q-See.com.

Be certain to make the most of your warranty by completing the registration form online. In addition to 
warranty and technical support benefits, you’ll receive notifications of product updates along with free 
downloadable firmware updates for your camera. Register today at www.Q-See.com!

Please see the back of this manual for exclusions.

Contents

INTRODUCTION 

4

Before you begin 

4

1. COMPONENTS & CONNECTIONS 

5

1.1 Control Module 

5

Connecting the Control Module 

6

LED Readout 

7

1.2 Remote Control 

8

2. OPERATION 

9

2.1 Setting Address and Protocol 

9

Setting Baud Rate and Protocol 

9

2.2 Directional Controls 

10

2.3 Other Controls 

10

Speed 

10

Auto 

10

2.4 Programming 

11

Preset Points 

11

Auto Pan 

12

Scan 

13

Surveillance Pattern 

13

2.5 Special Functions 

13

APPENDIX 

14

Troubleshooting 

14

WARRANTY 

15

PRODUCT SUPPORT 

15

Use your smartphone’s QR app to go directly 

to Q-See’s product registration page.

Summary of Contents for QD6505P










Reviews: