QSDR16RTCB User Manual
25
(Picture 46)
User name:
same as user name setup in DVR under Menu, Devices, Mobile
Password:
same as password setup in DVR under Menu, Devices, Mobile
Server address:
Public IP address of router DVR is connected to.
Web port:
Same as the Server Port you setup in the DVR, it needs to be forwarded to the IP address of the
DVR, setting range is between 1024 and 65535, the default setting is 18600. Note: this port is in addition to
the ports used for standard remote access.
Channel:
Select the channel from the DVR you want to monitor and click [OK] button (red box in Picture 45).
6. Once you configure your settings (Picture 45) and have hit the OK button, you will then be taken back to the
Main screen (Picture 44) and from here, you can choose the camera you want to view from the pull down
menu.
7. Click the [Connect] button (Picture 44) in the main menu and you will see an image of the live feed from your
DVR (Picture 46). Clicking the [Disconnect] button will discontinue your video feed.
8. The [Setting] button on your main menu interface (Picture 44) will allow
you to modify the display image and allow you to choose from a variety
of display modes including: Normal and full-screen.
9. The main menu interface (Picture 44) also displays the network status
information, network transmission speed, frame rate and image
resolution in the lower left hand corner of your screen (Picture 46). The
buffer percent and connection errors are shown in the bottom right hand
corner of the screen (Picture 46).
From left to right, the buttons on your main menu interface work with your PTZ camera as follows:
Navigate video image Left, Right, Up, Down
Zoom In and Zoom Out
Increase or Decrease Focus
Increase or Decrease Brightness
Sna
p to Capture Screen Image