QSDR16RTCB User Manual
22
(Picture 38)
(Picture 39)
SMTP Port:
indicates sender port of SMTP server. Generally the SMTP port value is 25. There are exceptions
however and you should check with your Email server’s website.
SMTP Server
: indicates server address you use.
Sender Email:
indicates sender’s email address. The email address should be consistent with the server you
use. That is to say, when you use email address –
Receiver Address:
indicates receiver’s email address. The email address is used to receive image transmitted
from motion detection alarm of DVR. Please clear the images you have received as soon as possible to avoid
overloading your email account.
5.2.7.3: PTZ Setup
Clicking on the PTZ Setup icon in the Device Management interface
(Picture 33) will allow you to configure your PTZ settings. Once
you click on the icon a pop up PTZ Setup interface as illustrated in
Picture 38 will appear. Select the channel you want to control in
the top row of the PTZ interface screen and set the PTZ protocol
from the protocol drop-down menu (Pelco-D or Pelco-P); the Baud
Rate from the baud rate drop down menu (1200, 2400, 4800 or
9600); the Stop Bit rate from the stop bit drop down menu (1 or 2);
the Parity Check from the parity drop down menu (None, Odd or
Even Mark Space); and the Address Code and Cruise status
accordingly. Please note the above mentioned channel settings
must match the settings of the PTZ camera.
5.2.7.4: Mobile Setup
Clicking on the MOBILE icon in the Device Management interface
(Picture 35) will allow you to configure your Mobile Phone settings.
Once you click on the icon a pop up MOBILE Setup interface as
illustrated in Picture 39 will appear.
User Name: indicate user name of DVR.
User password: indicate user password of DVR
Server port: Mobile monitoring port. Setting range is between 1024
and 65535. Default setting is 18600.
Note:
Connect the DVR to the Internet before setting the DVR port
number and make sure the server port number is not the same as
the network menus.
