INSTALLATION
CHAPTER 2
IMPORTANT: Follow these steps in order to complete the installation.
DO NOT CONNECT the camera until the camera driver is installed.
1. Windows PC users only: Install the IEEE 1394 PCI-Express card -
only if necessary.
2. Imaging Software - Install the software and drivers that your new QImaging
camera needs to capture images.
3. Rolera EM-C
2
- Connect the camera to your computer using the included IEEE 1394 cable.
DO NOT CONNECT the camera until you have a functioning FireWire port in
your computer and the camera driver is installed.
Step 1. Install the 1394 PCI-Express card (WindowsUsers
Only)
This step is for Windows PC users only. If you are installing the Rolera EM-C
2
on a Mac OS
computer, please skip to Step 2.
Check your computer for an existing FireWire port:
The Rolera EM-C
2
connects to your Windows PC via a FireWire port. If you already have a FireWire
port, you may not have to install the IEEE 1394 PCI-Express card. Check the connectors at the back
of your PC for a port that matches the FireWire port of the connection shown in Figure 1 or Figure
2.
Camera
Computer
Figure 1 —
9-pin to 9-pin FireWire (IEEE 1394) Port connection (recommended)
If your PC does not have a functioning FireWire port, you must install the IEEE 1394 PCI-Express card
that came with your camera.
If necessary, install the included IEEE 1394 PCI-Express card:
•
Shut down your computer.
•
Open the case, and install the included IEEE 1394 card into an empty PCI slot. See the user’s
manual for your computer for complete instructions on installing new PCI-Express cards.
•
Restart your computer. Windows should automatically install the appropriate software
drivers for the card.
4
Summary of Contents for Rolera EM-C2
Page 1: ......
