7
Code 28 or the software not working consistently. In this case, external power must be delivered to
the camera which can be accomplished by connecting the camera via one of the following methods.
•
Connection of an 1394 power supply with your camera is as follows:
Figure 5—
FireWire and 1394 Power Supply Connection
•
Connection of a 1394 IEEE HUB with your camera is as follows:
Figure 6—
FireWire and IEEE 1394 HUB Connection
Connecting the camera to a PC laptop computer
There are two common connection varieties for laptop computers;
1
Built-In Firewire port, or
2
PCMCIA Card.
1. Built-In 4-pin or 6-pin Firewire Port
There are cases with PC laptops where a built-in 6-pin FireWire port is available. If this is the case
with your computer, it is possible that the two power pins on the Firewire port have been
disabled, allowing only data communications. If you have such a connection or if you have a
built-in 4-pin connector, you will need to power the camera.
If you purchased a 1394 power supply from QImaging, connect your camera as follows:
Cam era
Com puter
110/240 VAC
Camera
Computer
110/240 VAC
1394 HUB
Summary of Contents for Retiga EXi
Page 1: ......
