28
Q Display series 2 - user guide
5.5 Chart settings
Chart settings provide various settings for adjusting the chart view to your preferences.
Open Chart settings in the Map’s application menu, by pressing the Chart settings
icon. All these settings are view specific – so changing them only affects the currently
active view. Chart settings include:
General
Chart orientation
Chart orientation sets the chart orientation to North-up or Course-up. With Course up your
course direction continuously points upwards, instead of rotating.
Course vector
Course vector is a projected line that indicates your heading. Can be toggled on or off.
Show trail
Show trail displays the route you have sailed with a line on the map. Can be toggled on or off.
Autocentre
Autocentre automatically recentres the map to your position after a few seconds of inactivity.
Can be toggled on or off.
Autozoom speed limit
Choose the speed limit for autozoom. Autozoom zooms in the chart when driving slower than
the set speed limit. Set the speed limit or turn off by setting to zero.
Low speed zoom level
Choose the zoom level for a low boat speed. This is the zoom level used when Autozoom is
activated (see above).
