25
Q Display series 2 - user guide
5.3 Navigation / Set a destination
The Q Experience provides robust auto-routing and navigation capabilities and is compatible
with Na and P marine charts. To start navigating, just set the destination
or select an existing route to use for navigating. NOTE: An active Na subscription is
required to use Autoroute with Navionics charts.
To set a destination, do one of the below:
Search for the place to use as destination
»
Open Search in the Map’s application menu.
»
Type in the place you want to find.
»
Select the corresponding option from the search results.
»
Select Set as destination in the Location properties menu.
Select the destination on the chart
»
Long press on the location where you want to go on chart.
»
Select Set as destination in the Location properties menu.
Select destination from My Places
»
Open My Places in the Map’s application menu.
»
Select place you wish to go to.
»
Select Set as destination in the Location properties menu.
To use an existing route, do the following:
»
Open My Routes in the Map’s application menu.
»
Select the route you wish to use for navigation.
»
Select Start navigation in the Route properties menu.
When navigating existing routes, the route direction and destination’s end are determined
automatically, based on which way you are currently heading, and how far you are from route
end points.
Once you have set the destination or selected a route, the navigation route will remain visible
until the navigation is stopped by the user – even if the Q display is rebooted.
To end or pause navigation, open the Map’s application menu and press on the stop or pause. If
you want to change the direction of the navigation on a route press the Change direction icon
in the Map’s application menu.
