Q CELLS Q.Pro-G3, Installation And Operation Manual

Page: 8 / 12

14 15 INSTaLLaTIoN aND oPeraTIoN MaNUaL SoLar MoDULeS GeNeraTIoN 3 (G3) – HaNWHa Q CeLLS aUSTraLIa PTY LTD
INSTaLLaTIoN aND oPeraTIoN MaNUaL SoLar MoDULeS GeNeraTIoN 3 (G3) – HaNWHa Q CeLLS aUSTraLIa PTY LTD
15 14
DANGER
! Risk of fatal injury due to electric
shock!
Ä Block off the installation zone.
Ä Keep children and unauthorized
individuals away from the solar power
system.
DANGER
! Risk of fatal injury due to electric
shock!
Ä ensure that modules and tools are not
subject to moisture or rain at any time
during installation.
WARNING
! Risk of injury due to falling mod-
ules!
Ä secure modules during installation.
Ä
Do not install modules in windy or wet
weather.
DANGER
! Risk of fatal injury due to electric
shock!
Ä only use dry, insulated tools.
Ä
Do not carry out the installation alone.
• only install undamaged modules and
components.
Ä Do not drill any other holes.
3.2 Preparation of installation
3 INSTaLLaTIoN
Ä
maintain an interval of at least 10 mm
between two modules.
10mm
10mm
Option 2:
Ä
install the module at the 4 mounting
points, see Fig. 3, p. 8.
Ä tighten clamps according to
manufacturer’s instructions.
NOTE
! Module damage may occur!
Ä Do not subject modules to mechanical
tension. max. torsion 10 mm/m.
Option 3:
Ä
install the module using mounting
profiles, Fig. 3, p. 8.
Option 1:
Ä
Fasten the module with 4 clamps in the
specified clamping range, see Fig. 3, p.
8.
Ä tighten clamps according to
manufacturer’s instructions.
3.3 Module installation 3 INSTaLLaTIoN