8
9
INSTaLLaTIoN aND oPeraTIoN MaNUaL SoLar MoDULeS GeNeraTIoN 3 (G3) – HaNWHa Q CeLLS aUSTraLIa PTY LTD
INSTaLLaTIoN aND oPeraTIoN MaNUaL SoLar MoDULeS GeNeraTIoN 3 (G3) – HaNWHa Q CeLLS aUSTraLIa PTY LTD
Fig. 2:
installation options for crystalline Q ceLLs modules. All dimensions are given in mm. Also observe the
allowed static loads and clamping range as specified on the following page.
the illustrated installation options apply for both horizontal and vertical module orientation.
Module
Clamp
Subconstruction
Mounting profile
2.3 Mounting options
2 PLaNNING
TYPe of
INSTaLLaTIoN
MoDULe
PoINT MoUNTING SYSTeM
LINear MoUNTING SYSTeM
INSTaLLaTIoN WITH
CLaMPS
Q.PRo-G3
Q.PRo BLK-G3
Q.PeAK-G3
Q.PLus-G3
INSTaLLaTIoN
oN
MoUNTING
PoINTS
Q.PRo-G3
Q.PRo BLK-G3
Q.PeAK-G3
Q.PLus-G3
INSTaLLaTIoN WITH
INSerTIoN ProfILeS
Q.PRo-G3
Q.PRo BLK-G3
Q.PeAK-G3
Q.PLus-G3
not permitted
IP1
IP2
CL3
CL4
245 - 445
180 - 380
0 - 300
0 - 300
CL1
245 - 445
180 - 380
2 PLaNNING
2.3 Mounting options
Specifications
MoDULe TYPe
MoUNTING oPTIoN
CLaMPING raNGe
1
[MM]
aLLoWeD STaTIC
LoaD
2
[Pa]
TeST LoaD
aCC. IeC 61215 [Pa]
Q.PRO-G3
Q.PRO BLK-G3
Q.PEAK-G3
Q.PLUS-G3
CL1
Push
245 - 345
346 - 445
3500
2400
5400
Pull
245 - 345
346 - 445
5650
4000
CL3
Push
245 - 445
5700
Pull
245 - 345
346 - 445
4000
4000
CL4
Push
0 - 300
2000
Pull
0 - 300
2000
FB1
Push
3500
Pull
3100
FB2
Push
4000
Pull
3100
IP1
Push
-
3700
Pull
-
3700
IP2
Push
-
1800
2400
Pull
-
1800
1
Distance between outer edge of module and middle of the clamp.
2
Describes the maximum module surface load (vertical to the module surface) regarding safety factors (e.g. euRocoDe).
For this purpose, the load value determined by load tests according to various criteria: laminate overlay, plastic
deformation, module failure, and were divided with a safety factor. the minimum calculated load value corresponds
to the maximum permitted load.
345
280
FB2
4 x Fastening
points
4 x Fastening
points
345
4 x Fastening
points
280
4 x Fastening
points
FB1
CL1
245 - 445
180 - 380
CL3
CL4
245 - 445
180 - 380
0 - 300
0 - 300
345
4 x Fastening
points
280
4 x Fastening
points
FB1
345
280
FB2
4 x Fastening
points
4 x Fastening
points
IP1
IP2
