Q CELLS Q.HOME PLUS ESS-G1 3.6 User Manual Download Page 52

Page: 52 / 64

7. Message Description

Type

Code

Description

Measures

protection function.
Wait until the event message
disappears. After the event

message is removed, it

automatically returns to normal.
If it is not removed until the time

limit is reached, it is converted

to a significant event.

PROTECTION

E202

ON SEQUENCE BATT
STATUS EVENT

While in progress, battery
discharged/charged operation is

terminated through the
protection function.
Wait until the event message
disappears. After the event

message is removed, it

automatically returns to normal.
If it is not removed until the time

limit is reached, it is converted

to a significant event.

PROTECTION

E203

ON SEQUENCE INV DC
LINK EVENT

While in progress, battery
discharged/charged operation is

terminated through the
protection function.
Wait until the event message
disappears. After the event

message is removed, it

automatically returns to normal.
If it is not removed until the time

limit is reached, it is converted

to a significant event.

PROTECTION

E204

ON SEQUENCE BATT V &
BATT I EVENT

While in progress, battery
discharged/charged operation is

terminated through the
protection function.
Wait until the event message
disappears. After the event

message is removed, it

automatically returns to normal.
If it is not removed until the time

limit is reached, it is converted

to a significant event.

PROTECTION

E0205 NORMAL GRID OFF

While in progress, battery
discharged/charged operation is

terminated through the
protection function.
Wait until the event message

Summary of Contents for Q.HOME PLUS ESS-G1 3.6

































































Search results

Summary of Contents for Q.HOME PLUS ESS-G1 3.6

Reviews:

Q CELLS Q.HOME PLUS ESS-G1 3.6, User Manual, Page: 52 / 64

Search results

Summary of Contents for Q.HOME PLUS ESS-G1 3.6

Reviews: