Q Acoustics 2000i serues, User Manual And Product Specifications

Page: 6 / 224

DO NOT expose your loudspeakers to excessive cold, heat, humidity or Introduction
sunlight.
The Q Acoustics 2000i series is a range of loudspeakers designed to meet
If you play your loudspeakers without their grilles on, be careful to protect
the highest expectations of dedicated 2-channel audiophiles and
the drive units from damage.
discerning movie enthusiasts. The range comprises:
DO NOT use makeshift stands. Fit the Q-Acoustics dedicated stand
2010i:
Compact Bookshelf speaker with a 100 mm bass driver.
according to the instructions and using any fixings provided. Your dealer
2020i:
Bookshelf speaker with a 125 mm bass driver.
will advise you.
2050i:
Floorstander with two 165 mm bass drivers
DO NOT dismantle the loudspeaker. You will invalidate the warranty.
2000Ci:
Centre channel with 2 x 100 mm bass drivers, which can be wall
mounted if required.
Unpacking your loudspeakers
2070Si:
140 Watt active subwoofer with a 2 x 170 mm driver and signal Unpack the speakers fully. Lift the speakers from the cartons by holding
sensing for automatic power on/off. the cabinets. Do not use the protective bags to lift them. The 2050i and
2070Si are heavy - get assistance to lift them if necessary.
The 2020i and 2050i speakers are both bi-wireable. All the loudspeakers
may be operated close to TV monitors with no ill-effects with the exception
When manoeuvring loudspeakers, do not drag them across the floor as
of the 2070Si, which should not be operated within 500mm of TV screens this may cause damage - lift them before moving them.
monitors or other magnetically sensitive equipment. Plasma and LCD
In the carton you will find: The loudspeaker/s and this product manual.
screens are unaffected.
In addition the packing for the following models contains:
Before making any connections to your loudspeakers make sure that all
2050i: A set of floor spikes and spike covers for each speaker. An Allen
active units in your system are switched off at the mains.
key to adjust the spikes once fitted.
When switching on your sound system or changing input sources, set the
2070Si: A power cord suitable for the mains supply in your area,
main volume control at a low level. Turn up the level gradually.
2 x Right angled RCA / Phono cables and an AV Setup CD.
NEVER play your sound system at full volume. The position of the
Check the product carefully. If any items are damaged or missing, report
volume control is deceptive and does not indicate the power level of the
this to your dealer as soon as possible.
system. Using very high volume settings may damage your hearing.
Retain the packing for future transport. If you dispose of the packing,
DO NOT connect your loudspeaker terminals to the mains supply.
please do so following all recycling regulations in your area.
Q Acoustics 2000i Series