Q Acoustics 2000i serues, User Manual And Product Specifications

Page: 10 / 224

Stereo Connections
Standard Connections
Connect the RED (+) terminal of the RIGHT loudspeaker to the RED,
Positive (+) terminal on the RIGHT channel of the amplifier. Connect the
BLACK (–) terminal of the loudspeaker to the matching BLACK,
Negative (–) terminal of the amplifier.
Bi-Wiring
Repeat this procedure for the LEFT channel.
Directly connecting the treble and bass networks of a loudspeaker to an
amplifier improves both bass performance and dynamic range.
To bi-wire: Prepare two twin cables for each loudspeaker. Unscrew all
In the case of the 2020i and 2 050i you may use any convenient
the loudspeaker terminals and remove both links. Now connect the
Po) or Negative (–) terminal. Refer to the illustration below.
treble terminals and the bass terminals to the amplifier following the
procedure described in Standard Wiring. Refer to the illustration below.
When your speakers are connected:
Switch on the system and play
some music at moderate level. Fine tune the speaker placement to suit.
Connecting Passive Loudspeakers
Bi-Wiring: 2020i and 2050i
Connecting the 2010i and 2000Ci
RIGHT SPEAKER LEFT SPEAKER
AMPLIFIER
RIGHT
SPEAKER
LEFT
SPEAKER
RIGHT
SPEAKER
LEFT
SPEAKER
RIGHT SPEAKER LEFT SPEAKER
AMPLIFIER
Standard Wiring: 2020i and 2050i
RIGHT SPEAKER
LEFT SPEAKER
AMPLIFIER
RIGHT
SPEAKER
LEFT
SPEAKER