8.2
Bluetooth Connection to Devices
The SP-350P uses a built-in Bluetooth Low Energy Connection (BTLE) to connect wirelessly to a smart phone
via the
uPyxis®
Mobile App or to a computer via the included Bluetooth Adapter (P/N: MA-NEB) and the
uPyxis®
Desktop App. To allow the SP-350P to connect via Bluetooth with other devices follow the steps
below:
1. Power on the SP-350P by pressing
.
2. Press
Info
(
) to launch the
DEVICE INFORMATION
screen.
3. Press
Diagnosis
(
or
) to launch the
SYSTEM DIAGNOSIS
screen.
4. Allow 5–10 seconds for the message in the top-right corner of the display change from
Starting BTLE...
to
BTLE Started
(Figure 7).
5. Choose to connect via one of two options:
(a) The
uPyxis®
Mobile App (see the
section), or
(b) The
uPyxis®
Desktop App (see the
section).
8.3
Factory Reset
Use the following steps to restore all device parameters to factory default:
1. Power on the SP-350P by pressing
.
2. Press
Info
(
) to launch the
DEVICE INFORMATION
screen.
3. Press
Diagnosis
(
or
) to launch the
SYSTEM DIAGNOSIS
screen.
4. Allow 5–10 seconds for the message in the top-right corner of the display change from
Starting BTLE...
to
BTLE Started
.
5. Press
Help
(
) to launch the
HELP
screen (Figure 11).
6. Press
Factory Reset
(
or
). The display updates as shown in Figure 12 appear and the user
can choose one of three options:
(a) Press
to start the factory reset,
or
(b) Press
Cancel
(
) to return to the
HELP
screen,
or
(c) Press
Exit
(
) to abandon the factory reset entirely.
7. After a successful factory reset, the message “Factory reset done.” will appear on the display.
8. Press
Exit
(
) to return to measurement mode.
SP-350P User Manual
| +1 (866) 203-8397
10
