36
© 1999 Directed Electronics, Inc. Vista, CA
long term event history
The system stores the last two full triggers in memory. These are not erasable. Each time the unit sees a full
trigger, the older of the two triggers in memory will be replaced by the new trigger. To access long term event history:
1.
With the ignition off, press and hold the Valet®/Program switch.
2.
Turn on the ignition.
3.
Release the Valet®/Program switch.
4.
Press and release the Valet®/Program switch within 5 seconds. The LED will flash in groups
indicating the last two zones that triggered the unit. The LED will flash for one minute or
until the ignition is turned off.
NOTE:
The Warn Away® triggers are not stored to memory and will not be reported.
optional vehicle recovery system (VRS
®
)
No additional parts are required to add the optional VRS® feature. However for the VRS® feature to be effective,
the 8618 Starter Kill Relay must be installed. The VRS® feature can be activated with the remote transmitter and
deactivated with the valet switch. If the VRS® option is selected it is recommended to program the Valet switch
to respond to more than one pulse for maximum security. (See
System Features Learn Routine
section of this guide.)
1.
Turn the ignition to the ON position.
2.
Press the lock button on the transmitter for 1 second. The parking light will flash once and
the siren will chirp once to confirm that the VRS system is armed and will enter the trigger
sequence next time a door is opened and then closed.
to arm VRS
Summary of Contents for 1000 ESP
Page 1: ...1999 Directed Electronics Inc Vista CA N439 12 99 1000 ESP Installation Guide...
Page 39: ......
Page 40: ......
