10
In case of problems or damage, turn the instrument off,
disconnect and mark it to prevent any further use! Consult
PyroScience
for advice! There are no serviceable parts inside the
device. Opening the housing will void the warranty!
The
FireStingGO2
is not water-proof, is sensitive to corrosive
conditions
and
to
changes
in
temperature
causing
condensation. Avoid any condition (e.g. direct sun light) causing
a heating of the device above 50°C (122°F) or below 0°C (32°F).
Avoid elevated humidity causing condensing conditions. Please
follow the safety instructions for integrated lithium-ion
batteries.
Handle the sensors with care especially after removal of the
protective cap! Prevent mechanical stress to the fragile sensing
tip and injuries with needle-type sensors! Avoid strong bending
of the fiber cable!
Calibration and application of the sensors, data acquisition,
treatment and publication is on the user’s authority!
The sensors and the oxygen meter
FireStingGO2
are not
intended for medical, diagnostic, therapeutic, or military
purposes or any other safety-critical applications. The sensors
must not be used for applications in humans and must not be
brought in direct contact with foods intended for consumption
by humans.
The
FireStingGO2
and sensors should be used in the laboratory
by qualified personnel only, following the user instructions and
the safety guidelines of the manual, as well as the appropriate
laws and guidelines for safety in the laboratory!
Keep the sensors and the oxygen meter
FireStingGO
2
out of
reach of children!
