10
8
Warnings and Safety Guidelines
Before using the
FireSting pro
and its sensors, read carefully the
instructions and user manuals.
In case of problems or damage, disconnect the instrument and
mark it to prevent any further use! Consult
PyroScience
for
advice! There are no serviceable parts inside the device. Please
note that opening the housing will void the warranty!
The
FireSting pro
is not watertight, is sensitive to corrosive
conditions and to changes in temperature causing condensation.
Avoid any condition (e.g. direct sun light) causing a heating of
the device above 50°C (122°F) or below 0°C (32°F). Avoid any
elevated humidity causing condensing conditions.
Handle the sensors with care especially after removal of the
protective cap! Prevent mechanical stress to the fragile sensing
tip! Prevent injuries with needle-type sensors!
Calibration and application of the sensors is on the user’s
authority, as well as data acquisition, treatment & publication!
The optical sensors and meter
FireSting pro
are not intended for
medical, diagnostic, therapeutic, or military purposes or any
other safety-critical applications. The sensors must not be used
for applications in humans and must not be brought in direct
contact with foods intended for consumption by humans.
The
FireSting pro
and optical sensors should be used in the
laboratory by qualified personnel only, following the user
instructions and the safety guidelines of the manual, as well as
the appropriate laws and guidelines for safety in the laboratory!
Keep the sensors and the fiber-optic meter
FireSting pro
out of
reach of children!
