6
4
Connecting Sensors
The fiber-optic oxygen, pH and temperature sensors, as well as
optical fibers needed for read-out of contactless sensors are
connected to the ST-connectors of the
FireSting pro
(
1 to 4) with a
male fiber plug.
•
Remove the black caps from the plug of the sensor / fiber.
•
Remove the red caps from the sensor ports at the
FireSting
pro
(the red caps should be put on again if it is not in use
anymore to protect the optics).
•
Insert the male fiber plug of the sensor cable into the ST-
port (female fiber connector) of the
FireSting pro
and turn
the bayonet coupling gently clockwise until the plug is
locked firmly.
