s
IMPORTANT:
Please write down serial #
located on back of terminal
before mounting.
Write your serial # here:
s
SAMPLE
Software Requirements
Single User installation,
Windows 8 or above
All Windows updates must be installed
prior to software installation
Must be Primary Admin
Regional settings & hardware
input in English
English
TM
TimeTrax™ Time & Attendance software should not
be installed on server PC’s.Pyramid Time Systems
does not support the use of TimeTrax™ software
on a server PC. For Multi User Upgrade, call
888.479.7264 Ext. 1.
Swipe card in the swipe channel from top to bottom.
If employee card number is successfully read, the time clock terminal will beep
Employee punches generated from swipe card are stored within the terminal.
The terminal stores the last 6,000 punches before download is required.
Depending upon usage, punches can be retrieved on a more or less frequent
basis.
Using Time Clock
Connect Terminal
Connect either end of RJ45 cable into “
SERIAL USB”
port located on
the back of time clock terminal.
Connect free end of RJ45 cable to the USB Adaptor.
Plug free end of USB Adaptor into UBS port on PC.
Connect power supply into
“POWER”
port located in compartment on
back of terminal.
Route the cables through channel at base of terminal.
Mount terminal (see instructions below).
Plug power supply into outlet.
1
2
3
4
5
6
7
3
7
4
5
2
1
