Pylontech PowerCube-H1, Product Presentation

Page: 41 / 43

Page 41
Contact SegenSolar (PTY) Ltd | e: info@segensolar.co.za | t: 08780 20663
\
Trouble shooting
Communication related problems:
1
）
Cable connections
Solution: Check the cable connections. Make sure all
the cables are connected in correct way.
2) Pin definitions of communication cables
Solution: Please refer to pin definition diagrams.
3) Inverter settings
Solution: Please change the inverter settings
according to battery parameters.
Functional related problems:
1) Battery over voltage
Solution: Please check the inverter
settings and the communication status
between the inverter and the batteries.
2) Battery voltages imbalance
Solution: Please disconnect the batteries
in one group, use a multimeter to test
their terminal voltages. Charge the low
voltage batteries to a similar voltage
value.
3) BMS error
Solution: Please swap the BMS or use
BatteryView to clear the BMS error.
At present, the complex technical training is only open to SegenSolar SA. Should you
experience any technical issues, please contact Segensolar for assistance. Pylontech
share the most advanced product knowledge with them.