Pyle Vintage PTCDS7UBTB, Manual

Page: 6 / 10

www.PyleAudio.com
Pyle Vintage
- Classic Style Turntable Systems
Please note:
- Make sure the direction is correct when inserting the tape into the system.
- There is some searching noise can be heard and the system cannot perform normal playback function
during fast forward mode.
- This is recommended to take out the cassette tape from the system every times after listening and
don’t leave the cassette tape inside the system when not under playback mode.
Phono - Vinyl record playing:
Please Note:
- Remove the stylus protector prior to attempting to play any record.
- Be sure that the tone arm is being detached from the tone arm rest before
operating -- and then re-secured again afterwards of playing the vinyl record.
1. Select “ Bluetooth/Phono/Aux ” function from function selector (3)
2. Set the speed selector to the proper position depending on the record to be played.
3. Place the record on the platter (use the spindle adaptor if required).
4. Lift the tone arm from the rest and slowly move it to the record side. The platter will
start to rotate.
5. Place the tone arm to the desired position of the record.
6. Adjust the volume to the desired level.
7. At the end of record, the platter will automatically stop rotating. Lift the tone arm
from the record and return it to the rest.
8. To stop manually, lift the tone arm from the record and return it to the rest.
Remark : As some kind of record the auto-stop area was out of the unit setting, so it will stop before the last
rack finish. In this case, select the auto-stop switch (29) to “ off “ position, then it will run to the end of the
record but will not stop automatically (turn off the unit by power button or switch back the auto-stop switch
to “ on “ position to stop the platter rotate). Then put back the tone arm to the rest position.
Aux-in connection with mobile drawer
Connect another audio device, e.g. (portable) CD player, MP3 player, to this system via
a with 3.5mm dia. plug. Connect one end of this cord to the 3.5mm dia. headphone jack
on the external device and the other end to the Aux-in jack (26) on the back of the unit.
Set the Function selector (3) to Bluetooth/Phono/Aux position. When connected in this
way it is possible to play back the music already on the connected device and the
portable device such as mobile phone, portable MP3 player…etc
Bluetooth connecting and Playback
1. Set the Function selector (3) to Bluetooth /Phono/Aux position and keep the Phono/ Bluetooth button
(9) in low level (Bluetooth).
2. The Bluetooth LED indicator (6) will be flashing, it means the Bluetooth in not yet connected and in
pairing / searching mode.
3. Switch on the Bluetooth feature of your Bluetooth device (such as mobile phone) and select “ Pyle
Turntable
” from the available network list.
4. Once the connecting was finish and connect successfully, the Bluetooth LED(6) will change to light up.
5. Start to playback your Bluetooth device and enjoy the music by the turntable unit.
Remark :

As the 'Bluetooth/Phono/Aux' function of this product designed in the same channel, the Aux in jack
has first priority. So please make sure you do not have an audio device connected via Aux input if you
wish to stream media via Bluetooth.

To re-connect or disconnect from the Bluetooth connection, press and hold the Play button (2), as
this will disconnect the Bluetooth device from the turntable. Repeat step 3 above to connect another
Bluetooth device.
Line out connection
You can connect the system to your whole hi-fi system by connecting the line out socket (32) to the
auxiliary input socket with a RCA cable (not included).