Pyle Vintage PTCDS7UBTB, Manual

Page: 3 / 10

www.PyleAudio.com
Pyle Vintage
- Classic Style Turntable Systems
Listening to radio
Manual tuning
1. Select the desired band by Radio band selector (13) (AM or FM or FM-Stereo).
2. Tune to the required station by turning the Tuning knob (15).
3. Adjust volume knob (5) to the desired volume level.
FM & FM-Stereo reception

Set the Radio band selector (13) at the “FM” position (Alternate option for weak-signal reception
station searching.)

Set the radio band selector (13) at “FM-St” position for receiving stereo programs. The FM-Stereo LED
indicator (14) will light up to show FM stereo program is receiving.
Hints for best reception: -
- AM : The receiver has a built-in AM bar antenna. If AM reception is weak, slightly rotate or
re-positioning of the unit which will usually improve the AM reception.
- FM : The receiver has a built-in FM wire antenna (31) hanging at the rear cabinet. This wire should be
totally unraveled and extended for best reception.
Playing compact discs
1. Turn Function selector (3) to select “ CD/USB/SD ” mode.
2. Press “Open/Close” button (19) to open the CD door (11).
3. Place a CD with the printed side facing up inside the tray & then close the CD door.
4. Focus search is performing, the LCD display (2) will show the total number of tracks & total playing
time.

Play / pause / stop mode
1. Press the “ Play/Pause/Stop ” button (20) to start playback, the first track will start playback.
2. To interrupt, press the “ Play/Pause/Stop ” button (20) once, the playing time will be freeze & flashing
on the LCD display (2). Press again to resume normal playback.
3. If press and hold the “ Play / Pause/Stop “ button (20) for over 2 seconds during playback mode. The
system will go to stop mode.

Skip/search mode (skip/search up / skip/search down )
1. During play or pause mode, if “Skip up” button (18) is pressed. It will go to next track and display the
track no. And then remain the play or pause mode.
2. During play or pause mode, if “Skip down” button (17) is pressed. It will go back to the beginning of the
track, original track no. is display and remain the play or pause mode.
3. After step 2, press “Skip down” button (17) again will go to the previous track and remain the play or
pause mode.
4. If press and hold the “ Skip up/down button “ (18,17) during CD/MP3 file playback, the playing track will
go fast forward or backward until the button being released.

For MP3 disc
1. Press “ MP3 folder “ up button (7), the folder no. will goes up
2. Press “ skip up “ or skip down (18,17) button, the track no. change.
3. When the desired track is being selected, press the “ Play/Pause/Stop ” button (20) to start playback.
*Refer to the remote control diagram button layout found later in this manual for button control layout.
ID3 (track/album title) function (by remote control)
1. Press the “ Info “ button during playback of MP3 disc, the song title is being displayed. Press the “info ”
button again to disable this function.
Song title/folder name search function (by remote control)
You can search the track by the title/folder name in disc during stop mode:-
1. Press the “ Find “ button once, then press the “Skip up” (or Skip down) button (18,17), you can search
the title of each song one by one under alphabet order on LCD display (2), then press the CD
“ Play/Pause/Stop ” button (20) to start the playback of the selected track.
2. Press it again, the “ Find ” button, the folder name will be displayed. Then press the “Skip up” (or Skip
down) button (18,17) to select the desired folder, and press the CD “ Play/Pause/Stop ” button (20) to
start the playback of all tracks inside that selected folder.