15
2
PASSIVE ARMING
The passive arming feature allows the system to
automatically arm after closing all doors. The
Passive Arming feature requires the ignition to
have been on for at least 10 seconds prior to
exiting the vehicle. This enables the key to be
turned on then off quickly to avoid passive
arming in the event of refueling, washing the
vehicle, etc.
The Passive Arming feature may be
enabled during installation.
To arm the system passively:
1. Turn the ignition key off (make sure
ignition was on for at least 10 seconds).
2. Exit the vehicle and close all doors.
• The LED flashes rapidly indicating that
the system is preparing to arm. (The
system can be armed at any time by
pressing transmitter button 1.)
• If the optional countdown feature is
programmed, the siren will chirp every
2 seconds until armed.
• The siren will chirp 30 seconds after
the last door is closed to indicate the
system is armed. NOTE: Opening a
door resets the passive arming timer.
• The doors will lock.†*
†
If Passive Locking was enabled during installation.
DISARMING OPERATION
To disarm the system press transmitter button 2.
• The siren will chirp twice.
• The parking lights will flash twice.*
• The doors will unlock.*
• The dome light will turn on for 30
seconds.*
TAMPER ALERT
If the alarm was triggered while away from the
vehicle, the siren will chirp 3 times and the
parking lights will flash 3 times on disarming for
tamper indication.
AUTO REARM
The Auto Rearm feature allows the system to
automatically re-arm and lock the doors* in the
event the system is disarmed and a door is not
opened within 30 seconds.
This programmable
feature may be enabled during installation.
SILENT ARMING/DISARMING
Press transmitter button 3 to silently Arm or
Disarm the system for one-time operation. The
system can also be programmed for full-time
silent operation during installation.
IGNITION LOCK*
The ignition locking feature automatically locks
the doors 5 seconds after the ignition key is
turned on, and automatically unlocks when the
ignition key is turned off. To avoid locking keys
in the vehicle, the ignition locking feature will be
cancelled if a door is open when the ignition is
turned on.
This feature may be disabled during
installation.
REMOTE PANIC
In the event of an emergency (PANIC) situation,
the system’s siren can be triggered for 30
seconds to attract attention.To activate the Panic
Feature, press transmitter button 1 for 3
seconds:
• The siren will sound.
• The parking lights will flash*.
Press button 1 to exit panic mode and rearm
the system. Press button 2 to exit panic mode
and disarm the system. The Panic Feature will
not operate when the ignition is on.
*
Optional feature
FACTORY
DOOR LOCK
RELAYS
(-) DOOR LOCK
(-) DOOR UNLOCK
BLUE -
AZUL
GREEN -
VERDE
LOCK/UNLOCK
SWITCH
L
UL
FACTORY
DOOR LOCK
RELAYS
(+) DOOR LOCK
(+) DOOR UNLOCK
LOCK/UNLOCK
SWITCH
L
UL
86
30
87
87a
85
86
30
87
87a
85
GREEN -
VERDE
BLUE -
AZUL
+12V
FACTORY DOOR
MOTOR
CUT
CORTE
CUT
CORTE
X
X
86
30
87
87a
85
LOCK/UNLOCK
SWITCH
L
UL
BLUE
AZUL
+12V
86
30
87
87a
85
GREEN
VERDE
NEGATIVE TRIGGER
CIRCUITO NEGATIVO
POSITIVE TRIGGER
CIRCUITO POSITIVO
DOOR LOCK WIRING DIAGRAMS
DIAGRAMA DE SEGUROS DE PUERTAS
AFTER-MARKET
ACTUATORS
86
30
87
87a
85
86
30
87
87a
85
GREEN -
VERDE
BLUE -
AZUL
+12V
RELAY WIRING DIAGRAMS
DIAGRAMA DE RELEVOS
86
30
87
87a
85
+12V
TO WIRE IN VEHICLE
A ALLAMBRE EN VEHICULO
(-) OUTPUT
FROM ALARM
(-) SALIDA
PARA ALARMA
86
30
87
87a
85
(-) OUTPUT
FROM ALARM
(-) SALIDA
PARA ALARMA
+12V
TO WIRE IN VEHICLE
A ALLAMBRE EN VEHICULO
POSITIVE TRIGGER
CIRCUITO POSITIVO
NEGATIVE TRIGGER
CIRCUITO NEGATIVO
ADDING ACTUATORS
ACTIVADOR DE PUERTAS
REVERSE POLARITY
POLARIDAD INVERSA
VACUUM PUMP
CUT
X
86
30
87
87a
85
LOCK/UNLOCK
SWITCH
L
UL
BLUE
+12V
86
30
87
87a
85
GREEN
VACUUM SYSTEM
SISTEMA DE VACIO
BW2150 art dept.qxd 1/27/2004 3:47 PM Page 2
