background image

6

Please follow the instructions below when a trapezoid occurs on the projector screen:

Incorrect installation, 
the images right-left small.

Screen

Screen 

symmetry 

axis

Projector

Incorrect installation, 
the images left-right small.

Installed correctly,
the image is rectangular.

CEILING/TABLE MOUNT SETUP

Contact a professional service man to mount this projector to a ceiling. Follow the 
instructions below for the correct projector positions:

             

 

WARNING

This projector might damage beyond repair when it's incorrectly mounted on a ceiling or 
when its incorrectly installed on a surface or installed on a incorrect surface. It may also 
inflict damage to persons within close vicinity.

This projector can only be used in an environment with a temperature not exceeding the 
range of 0~35 . The projector may malfunction if temperatures vary outside the normal 
operating range.

The sharpness of the screen might be interrupted when the projector is being used in a 
dusty, wet, moist or smoke filled environment. The projector might malfunction in a moist 
or wet environment. Take care of sufficient ventilation around the projector. Otherwise this 
projector might overheat and cause 

life threatening

 

situations!

Screen

Screen

Screen

Screen

Projector

Projector

Projector

Projector

Front projection ceiling mount

Front projection table mount

Rear projection ceiling mount

Rear projection table mount

11

FOCUSING AND KEYSTONE ADJUSTMENT

FOCUSING

Turn the lens to focus the projected image.

NOTE:

 When you replace the projector from a cold to a warm environment water vapour 

might occur. Don't turn the projector on when this occurs but wait until the vapour 
has disappeared.

KEYSTONE

If a projected picture has keystone distortion, correct image with 

Keystone

 adjustment. The 

image becomes trapezoid shape when the screen or project is not level. Please reposition 
the projector to improve its angle to the screen. However, the circumference of the image 
may not be focussed.

If not able to use the Keystone correction function to correct the trapezoid distortion, please
reduce of the projector to centre the screen vertically.

Keystone

Screen

Projector

Projector

Screen

Summary of Contents for PRJV66










Reviews: