www.PyleUSA.com
10
16:9 WIDE:
Select this option if the unit is connected to a wide-screen TV set. A wide-screen image will be
displayed in full screen in its native aspect ratio while the 4:3 image will be stretched out horizontally to fit
the screen.
1.2 ANGLE MARK:
Set this item to ON. When a disc encoded with multiple camera angles is playing, the
angle mark will display on the screen. View di erent video camera angles by pressing
[ANGLE]
on the
remote control. Set this item to OFF to disable this function.
NOTE:
This function only works if the disc is encoded with multiple camera angles.
1.3 OSD (on-screen display) language:
Set the on-screen display language in this item.
1.4 CAPTIONS:
Set this item to ON to show closed captions on a disc that has been encoded with closed
captions. Set this item to OFF to hide. You can also press
[SUBTITLE]
on the remote control to show or hide
the closed captions.
NOTE:
This function only works if the disc is encoded with closed captions.
1.5 SCREEN SAVER
ON:
If the image remains motionless on the screen, for example the disc is paused, stopped etc. for several
minutes, a screen saver will appear on the screen. Press any key or button to wake it up.
OFF:
Disable the screen saver function.
1.6 LAST MEMORY
ON:
Each time you turn OFF the unit or stop the disc, it will memorize the last play time.
Next time you turn on the unit and play the same disc, the unit will play from that memorized point.
OFF:
Disable the last memory function.
2. AUDIO SETUP PAGE
2.1 SPEAKER SETUP
2.1.1 DOWNMIX
LT/RT:
The 5.1-channel audio is mixed into left channel and right channel and is output via the FL and
FR speaker respectively.
STEREO:
The 5.1-channel audio is mixed into stereo signal and is output via the FL and FR speaker.
NOTE:
This function only applies to Dolby AC-3 encoded 5.1-channel discs.
3. VIDEO SETUP PAGE:
This menu is used to set up the picture quality of the unit.
3.1 QUALITY:
Adjust items according to your personal preference.
3.1.1 SHARPNESS:
There are three options (HIGH, MEDIUM and LOW) for you to choose in this item.
3.1.2 BRIGHTNESS, CONTRAST, GAMMA, HUE, SATURATION, LUMA DELAY
Enter an item and use the direction keys
[LEFT] / [RIGHT]
to adjust the value, then press
[ENTER]
to confirm.