www.PyleUSA.com
13
SPECIFICATIONS
• Display Type: 15.6’’ LCD
• Screen Resolution: 1366 x 768 Pixels
• Aspect Ratio: 16:9/4:3
• Monitor Rotation: 270 Degree Left/Right
• Battery: Li-Polymer, 7.4V 2400mAh
• Battery Life: up to 2 hours
• Charging Time: 4.5 hours
• Frequency Response: 20-20kHz
• Dynamic Range: >85dB
• T.H.D.: <1.0%
• CD/DVD Compatibility Type: MPEG4, VCD, CD-RW, DVD-R
• Digital Media File Support: MP3, WMA, JPG, VCD, EVD, VOB
• Maximum USB/SD Flash Memory Support: Up to 32GB
• Battery Operated Remote, Requires (2) x ‘AAA’, excluded.
• Power: 100/240V (12V DC Power Adapter)
• Open Dimensions (L x W x H): 15.43’’ x 10.23’’ x 11.41’’ -inches
• Closed Dimensions (L x W x H): 15.43’’ x 10.23’’ x 1.77’’ -inches
TROUBLESHOOTING
Before resorting to maintenance service, please check the following chart.
Symptom
Solution
No sound or distorted sound
Make sure your DVD is connected properly and all cables are securely
inserted into the appropriate jack.
Cannot advance through a movie
You can not advance through the opening credits and warning
information that appears at the beginning of movies because the
disc is programmed to prohibit that action.
The icon appears on screen
The feature or action cannot be completed at this time because:
1. The disc software restricts it
2. The disc software does not support the feature
3. The feature is not available at the moment
Picture is distorted
The disc might be damaged. Try another disc. It is normal for some
distortion to appear during forward or reverse scan.
No forward or reverse scan
Some disc have a section that prohibits rapid scanning or title and
chapter skip. The movie is often programmed to prohibit skipping
through the warning information and the credits at the beginning
of a movie.
The player breaks down when a
USB or memory card is inserted
into the player
The connected U drive or the memory card is probably not an
original version. The player cannot play a U drive or memory card of
a non-original version.
If the player breaks down, turn it off and unplug it from the power
supply. Reconnect it to the power supply and switch it on again.
The player will resume normal status.