www.PyleUSA.com
5
11.
[MAIN]
Controller, used to adjust the volume of MAIN and USB PORT output.
12.
[CLIP]
LED, it will light up when the MAIN output signal is too high.
13.
[POWER ON]
LED, it will light up when the mixer’s power is on.
14.
[PHONES]
3.5mm output jack, connect with earphones, it is supporting stereo
phone plug.
15.
[PHONES]
6.35mm output jack, connect with earphones, it is supporting
stereo phone plug.
16.
[PHONES]
Controller, control the volume of earphones.
17.
[AUX IN]
3.5mm jack, this is an auxiliary STEREO input, flexible connectivity for
a variety of external audio devices.
18.
[STEREO IN]
3.5mm jack, this is an auxiliary stereo input, flexible connectivity
for a variety of external audio devices. The volume can be controlled by
external audio devices or MAIN controller.
19.
[BT/USB]
Convert switch, when the switch is bounce up, it connect with
Wireless BT. Press it down to connect with USB.
20.
[LINE IN]
Stereo RCA input jacks, connect an audio source with line signal
level, such as CD player, tape deck etc.
21.
[CH 2/3 STEREO INPUT]
Jacks, for connecting to line level device (e.g. electric
keyboard) via 6.35mm plugs, if only connect to L (MONO) jack, the mixer will
send out the same mono signal to L and R outputs.
22.
[MAIN MIX]
Stereo RCA output jacks, connect the input of an amplifier or a
recorder.
23.
[MAIN]
Stereo 6.35mm output jacks, connect the input of an amplifier or a
recorder.
