3
INSTRUCTIONS
GENERAL INFORMATION
• Never place the appliance next to naked flames or other heat sources.
• Do not open the lid more often than required. Do not leave the lid open more often
than is necessary. This will influence the duration of the cooling or keeping warm.
• The duration of the cooling or keeping warm is also dependent on the ambient
temperature.
• The appliance is not suitable for permanent operation.
•
The appliance can be connected to two different energy sources:
- Alternating current 110V~
- Direct current 12V
•
The respective indicator lamp will indicate the mode:
- Green for cooling
- Red for keeping warm
• Do not switch directly from one operating mode into the other. If you would like to
change the operating mode, turn the appliance Off. Wait about 30 minutes before you
switch it to the other operating mode.
COOLING
• You may keep cold foods cold for several hours.
• Turn the switch to the “
COLD
” position
• For best results, only store already cooled food/ beverages in the cooler. Select a place
of use that is protected from direct sunlight.
KEEPING WARM
• You may keep hot food / beverages warm for several hours, maximum 122°F to 140°F
• Set the switch to the “
HOT
” position.
• The peltier element will switch off and on at intervals to maintain the temperature.
The red control light will be lit up when the peltrier element is in operation and when
the fan is running.
• The appliance is not designed for reheating. Cold food will only warm up slightly after
about 2 hours.
CONNECTION TO THE ALTERNATING CURRENT
1. Remove the power cord for the direct current, if necessary.
2. Check to make sure that the mains voltage that you want to use is110 V~.
3. Plug the power cord for alternating current into the ~AC socket on the appliance.
4. Connect the device to a properly installed earthed socket.
5. Set the switch to
COLD
for cooling and to
HOT
for keeping warm.
CAUTION: RISK OF OVER HEATING!
Keep the ventilation slots free!
If the heat generated by the operation is not properly dissipated, it can result in
overheating and fire.
INTENDED USE
• The appliance is designed for the cooling of pre-cooled or for keeping hot dishes and
beverages warm.
• It is intended for use in the household and in similar applications, such as: In personal
kitchen areas in shops, offices and other work areas;
• By guests in hotels, motels and other accommodation;
• In bed and breakfast accommodation;
• To use for camping; In motor vehicles.
•
It is not intended for the following use:
In agriculture; In catering and similar wholesaleuse.
This appliance should not be exposed to the rain.
SUPPLIED PARTS
1x Cooler Box
1x Power Cord for AC Current 110Volt
1x Car Power Cord for DC 12 Volt
UNPACKING THE APPLIANCE
• Remove the appliance from its packaging.
• Remove all packaging materials such as films, filler material, cable clips and carton.
• Check the contents for completeness.
• Check the appliance for possible transport damage to prevent hazards.
CONNECTION
• Before you plug the power plug into the power outlet, ensure that the mains voltage
corresponds with that of the appliance. You can find information about this on the
rating plate.
• Only connect the appliance to a properly installed earthed socket.
BEFORE FIRST USE
Remove all packaging residues from the device and the connections and clean the
device thoroughly!
www.NutrichefKitchen.com
Summary of Contents for Nutrichef PKTCEC4BL
Page 1: ...by ...
