CONNECTION TO THE DIRECT CURRENT
1. Remove the power cord for the alternating current, if necessary.
2. Turn on the engine of the motor vehicle.
3. Plug the power cord for direct current into the
DC
socket on the appliance.
4. Connect the appliance to the cigarette lighter in the motor vehicle.
5. Set the switch to
COLD
for cooling or to
HOT
for keeping warm.
NOTE:
Save the battery of your motor vehicle. Only run the appliance in the motor vehicle while
the engine is running.
TERMINATING OPERATION
There is no automatic shut-off . The appliance runs permanently while it is connected to
a power supply and switched on.
1. Set the switch to the “
OFF
” position.
2. Unplug the power cord from the socket or the cigarette lighter.
3. Unplug the power cord from the appliance.
CLEANING
WARNING:
• Always unplug the power cord from the appliance and from the socket / the cigarette
lighter!
• Never immerse the appliance in water! Otherwise this might result in an electric shock
or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Use a moist towel to clean the inside and the outside. You may add a dishwashing liquid
to the towel.
• Dry it with a cloth afterwards.
• Fasten the lid back into the holder.
Storage
• Clean the appliance as described and allow it to dry.
• We recommend that you keep the appliance in the original packaging if it will not be
used for long periods.
• Always store the appliance out of the reach of children in a dry, well ventilated place.
5
TROUBLESHOOTING
APPLIANCE IS NOT FUNCTIONING
Possible cause:
The switch setting has not been selected correctly.
Remedy:
Check the switch setting.
Possible cause:
There is no current being supplied to the appliance.
Remedy:
Check the connection to the energy source.
• Check the domestic power socket with a different appliance.
• Check the fusebox.
• Is the connector plugged in correctly into the appliance and into the energy source?
• Does the cigarette lighter of your motor vehicle work without a problem?
APPLIANCE DOES NOT FUNCTION WITH DIRECT CURRENT
Possible cause:
The fuse in the plug of the 12V power cord is faulty.
Remedy:
Replace the fuse. You can obtain one from a specialized dealer.
Possible cause:
The cigarette lighter of your motor vehicle is faulty.
Remedy:
Contact a specialist for motor vehicles.
THE APPLIANCE SHUTS OFF DURING OPERATION
Possible cause:
Inadequate ventilation.
Remedy:
• Keep the ventilation slots free
• Position the appliance so that the air may circulate freely
TECHNICAL SPECIFICATIONS
Model:
PKTCEC4BL
Power Supply:
110V~ 60Hz
Power Consumption Cooling:
60W
Keeping Warm:
55W
Direct current
Power Supply:
12V
Power Rating Cooling:
48W
Keeping Warm:
42W
Climate Class:
N
www.NutrichefKitchen.com
Summary of Contents for Nutrichef PKTCEC4BL
Page 1: ...by ...
