background image

13.0 Compass Mode - 

Precautions 

13.1 Compass Mode - 

Compass Directions and Bearing Directions

13.2 Compass Mode - 

Compass Mode

The  Precautions  when  Using  the  Compass

!

Check  the 

'What  is  Magnetic  Declination'  section  for 
more  details.

Keep  your  Watch  away  from  magnets  or  any 
appliances  which  may  contain  magnetic 
objects  such  as  mobile  phones,  speakers, 
motors  and  etc.

!

The  Watch,  like  most  magnetic  compass, 
points  to  the  magnetic  north  which  is  slightly 
different  from  the  true  north. 

!

Perform  the  compass  calibration  from  time  to 
time,  because  the  calibration  maintains  the 
precision  of  the  compass. 

!

To  achieve  an  accurate  result,  you  should 
avoid measuring  direction  on  the  following 
conditions:
1) The  watch  is  placed  close  to  a  magnetic 

object

2) The  watch  is  placed  close  to  a  metal 

object

3) The  watch  is  placed  close  to  an  electrical            

appliance

4) The  watch  is  placed  inside  a  moving 

object  or  a  ferroconcrete  building.

Compass  Mode

  

!

In  the  Compass  Mode,  the  top  of  the  display 
shows  the  compass  direction.  

!

The  middle  display  shows  the  bearing direction. 

!

The  bottom  display  shows  the  current  time  in 
hour  and  minute.

!

The  pointer  encircled  the  display  shows  the 
direction  of  magnetic  North  analogically.

IDLE  Mode

!

If  no  button  is  pressed  for  about  1  minute,  the 
Watch  will  go  to  the  IDLE  Mode  automatically. 
To  activate  the  compass  again,  press  any 
button.

Distortion

!

If  distortion  is  detected,  the  indicator  "

OFF 

CAL

"  with  flashing  direction  digits  will  appear. 

!

Please  refer  to  the  coming  section  "Calibrating 
the  Compass"  to  restore  the  compass  to 
normal  operation  when  distortion  occurs.

COMP

Digital  Compass  Mode

current time

bearing direction 
of navigation 
direction

magnetic north pole
pointer

navigation direction

compass direction

Compass Mode

Idle Display

Normal Display

Distortion display

13.3 Compass Mode - 

Backward Bearing Direction and Compass Lock

The  Direction  of  an  Object

!

The  direction  of  an  object  from  a  point  can  be 
specified  in  either  compass  directions  or  bearing 
directions.

!

The  Watch  includes  both  compass directions  and 
bearing  directions.

The  Compass  Directions

!

The  compass  directions  are  shown  in  the 
adjacent  table. 

!

For  example,  in  the  figure  on  the  left,  the 
compass  direction  of  object  B  from  point  A  is  due 
East.  The  compass  direction  of  object  C  from 
point A  is  Southeast.   The  compass  direction  of 
object  D  from  point A  is  Northwest.  

The  Bearing  Directions

!

The  Bearing  direction  of  an  object  is  defined  as 
the

 

angular  difference  between  North  and  the

object.  (Assume  0 for  due  North,  and  the 
measuring  range  is  from  0   to  359 ).

!

For  example,  in  the  figure  on  the  left,  the bearing 
direction  of  object  B  from  point  A  is  90 .  The 
bearing  direction  of  object  C  from  point A  is  135 . 
The  bearing  direction  of  object  D  from  point  A  is 
315 . 

°

°

°

°

°

°

object B

object B

object C

Compass Directions

Bearing Directions

object C

object D

object D

angular 
difference

point A

N

E

90°

SE

135°

NW

315°

point

A

N

Marks

N

NE

E

SE

SSE

SSW

WNW

NNW

Compass Directions

Bearing Directions

North

Northeast

East

Southeast

East Southeast

South Southwest

North Northwest

S

SW

W

NW

South

Southwest

West

Northwest

ESE

ENE

WSW

NNE

West Northwest

West Southwest

South Southeast

East Northeast

North Northeast

Backward  Bearing  Direction 

!

The  Watch  includes  a  backward  bearing  function.

!

The  backward  bearing  direction  is  the  bearing 
direction  in  the  opposite  direction  from  the   
normal  bearing  direction.

!

When  the  'Backward  Bearing'  indicator  "          "     
appears,  the  Watch  is  showing  the  backward 
bearing  direction  of   the  navigation  direction. 

!

In  the  Compass  Mode,  press  the  [S/S]  button  to 
select  between  normal  and  backward  bearing 
directions.

Compass  Lock

!

The  Watch  includes  a  compass  lock  function  that 
locks  useful  direction  reading.

!

In  the  Compass  Mode,  press  the  [L/R]  button  to 
lock/unlock  the direction reading. 

!

When  the  "Lock"  indicator  "            "    appears,  the 
compass  direction,  bearing  direction  and  the 
magnetic  north  pole  pointer  are  locked.

!

Compass  Lock  will  be  released  automatically 
when  the  Watch  enters  IDLE  Mode.

COMP

Norm al Bearin g Dire ctio n

Backward Bearin g Dire ctio n

305°

125°

backward 
bearing 
indicator

normal 
bearing 
direction

backward
bearing 
direction

[S/S]

Dire ctio n Unlo cked

Dire ctio n Locked

compass

lock indicator

[L/R]

COMP

COMP

COMP

Summary of Contents for PSKIW25
















Reviews: