background image

WIRING DESCRITION

10PIN CONNECTION

BROWN         

Parking light wire (12v positive output) connect to parking light wire

BROWN         

Parking light wire (12v positive output) connect to parking light wire

PURPLE         

TACH wire (AC input) connect to TACH signal wire (coil or injector)

YELLOW/        

Starter kill wire (500mA negative output) connect to starter kill                         

GREEN           

relay.

               

ORANGE         

Lock       NC        (See page 5)

WHITE           

Lock      COM     (See page 5)

YELLOW        

 Lock       NO        (See page 5)

ORENGE/        

Unlock   NC        (See page 5)

BLACK

WHITE/           

Unlock   COM     (See page 5)

BLACK

YELLOW/ 

Unlock

   

NO        (See page 5)

BLACK

FEATURES AND OPERATIONS

IGNITION LOCK:

Door locks automatically when ignition is ON and brake pedal is depressed after driving 15 

seconds. Doors will unlock when ignition is turned off.

SHOCK SENSOR PRE-WARNING:

Siren chirps rapidly when shock sensor is trigger. If shock sensor is trigger for a second 

time within 10 seconds, the siren will sounds for 30 seconds.

ALARM AND REMOTE STATER INTERACTION:

Your remote engine start can be active even if the alarm system is armed or disarmed, 

arm or re-arm the alarm when engine is running via remote starting.

REMOTE ENGINE START:

Press      

button on the transmitter, siren will chirp once and parking light will turn on, within 

5 seconds press     button again engine will start 2 seconds later. Parking light will flash as 

long as the engine is running 10 minutes. If the engine refused to start, the system shut off 

completely. You may be experiencing a mechanical problem.

Summary of Contents for car security system











Reviews: