Pxmalion Core I3, Assembly Instructions Manual

Page: 14 / 48

X-Axis Step 3: Timing belt Assembly on X-Axis
After tightening the timing belts, please cut
the extra belts and cable ties. Install the rest of
2 M4 lock nuts on the M4*25 screws to
prevent the timing belts .
Tighten the timing belts:
1. Preassemble 2 cable ties near M4*25 screws.
2. Grip the extruder to the right with your right hand and
tighten the timing belts with the left hand.
3. Lock the cable ties. The upper side and lower side are in
parallel. Finally, faster the cable ties. You will get a bounced-
back feeling while touching it.