Slide around the X axis
slider to make it slide in
parallel.
2. After leveling the x
motion system, tighten
the M4 screw on the
screw rod washer to
lock.
1. Rotating the screw rod will help
adjust the height difference
between both sides of X screw rods
holders. X motion slider will move
parallel in lateral direction by
reducing the height difference.
3. Tightening the M4 screw
on the coupler after the
screw rod is inserted into the
coupler completely.
Summary of Contents for Core I3
