CHANNEL 1 – select the effect
CHANNEL 2 – setting of speed (higher value – faster changes)
CHANNEL 3 – setting of fade (higher value – smoother transition)
CHANNEL 4 – setting of brightness (higher value – stronger light)
sign (“x”) – means the ability to drive the parameter of the selected effect
sign (“–”) – means no ability to drive the parameter of the selected effect
6.4 Response to the lack of DMX signal
This function is used both to protect the system against the
disappearance of DMX signal and to gain the driving of LEDs without
connecting an external driver. After it has been activated, in case of the lack of
DMX signal, the module will perform the selected function by itself.
Reconnecting of DMX signal will automatically break the performed function,
and the module will again send the command with a DMX line.
13
