2
Safety conditions
The PX763 36 x 350mA Matrix is a device powered with safe voltage up to
12 V; however, during its installation and use the following rules must be
strictly observed:
1. The device may only be connected to 12 V DC (stabilized voltage) with
current-carrying capacity compatible with technical data.
2. All the conductors should be protected against mechanical and
thermal damage.
3. In the event of damaging any conductor, it should be replaced with a
conductor of the same technical data.
4. Connection of DMX signal can only be made with shielded conductor.
5. All repairs and connections of outputs or DMX signal can only be
made with cut off power supply.
6. The PX763 should be strictly protected against contact with water and
other liquids.
7. All sudden shocks, particularly dropping, should be avoided.
8. The device cannot be turned on in places with humidity exceeding
90%.
9. The device cannot be used in places with temperature lower than 2°C
or higher than 40°C.
10. Clean with damp duster only.
4
