8. The device cannot be turned on in places with humidity exceeding 90%.
9. The device cannot be used in places with temperature lower than 2°C
or higher than 40°C.
10. Clean with damp duster only.
3
Connector and control elements
4
Designation of displayed messages
DMX address of a device – a basic item in the MENU
setting parameters for all channels simultaneously
setting parameters for each channel individually
inverting the meter display 180 degrees
DMX address setting
control method selection (RGB, Lightness / Colour, etc.)
no DMX signal response method selection
Master / Slave mode settings
Lightness / Colour control mode
6
PX714
4x350 mA/48V
power supply 12 – 48V DC
DMX-512 output
DMX-512 input
NTC 4K7 temperature sensor
control outputs
display
programming keys
