you can choose color correction for each set of LEDs controlled by the device
to achieve at full power the color white.
What is more, the driver has been equipped with an output for the
temperature sensor and RDM protocol support. The support of the sensor
allows for power reduction depending on temperature.
2
Safety conditions
PX714 LED Driver 4 x 350mA/48V is a device powered with safe voltage
12 – 48V; however, during its installation and use the following rules must be
strictly observed:
1. The device may only be connected to 12 – 48V DC with current-carrying
capacity compatible with technical data.
2. All the conductors should be protected against mechanical and thermal
damage.
3. In the event of damaging any conductor, it should be replaced with a
conductor of the same technical data.
4. Connection of power supply can only be made with a conductor of
minimum cross-section area of 2,5mm
2
and DMX signal with shielded
conductor.
5. All repairs and connections of outputs or DMX signal can only be made
with cut off power supply.
6. PX714 should be strictly protected against contact with water and
other liquids.
7. All sudden shocks, particularly dropping, should be avoided.
5
