PXM PX292, User Manual, Page: 9 / 34

4.3.1 Setting the DMX address – L0 version
In the PX292-L0 version, the user can select a DMX address from the
range 1 – 512 (when the Cbn operating mode is set to 8ch ), it means that if
the user selects the address, e.g. 510, then channels 1 – 3 will take
successively addresses 510, 511 and 512. Channels 4 – 8 will be assigned to
address 512.
To set the DMX address in version L0 (PX292-L0), 8ch operating mode:
ENTER ENTER
NEXT
Additionally, in the L0 version, the user by selecting Cbn (operating mode)
on Adv (advanced) can set the DMX address as follows:
•
SEQ – sequence – the user sets the DMX address from the range 1 –
512, and the next channels are assigned to the next DMX addresses.
This means that if the user selects the address, for example: 508, then
channels 1 – 5 will take successively addresses 508, 509, 510, 511
and 512. Channels 6 – 8 will be assigned to address 512.
• ALL – setting all channels on one DMX address,
• Ind – individual setting of DMX addresses for each channel.
9