4.9.1 Restore default settings
To restore the device to its default settings, press and hold the
previous
key while switching on the device. One of the messages that will be displayed
will say
dFl
, which means successful restoring to default settings (the
previous
key has to be held down while powering on the device, until the
dFl
message is displayed).
If this message is accepted by pressing
enter
, the default settings will be
restored. The user can also exit this menu level without restoring the default
settings. In order to do this, press the
escape
key.
ESC
PRESSED PREV
ENTER
Please note that after restoring to default settings, all the operating
parameters of the device will revert to the following ones:
•
DMX address:
001
•
no signal: oFF
•
smooth: diS
(
003
in
L0
version)
•
characteristics of the output channels:
Lin
(on all channels)
•
screen saver:
oFF
•
operation mode: 8ch
22