PXM PX292, User Manual, Page: 19 / 34

NOTE! In the L0 version, the smoothing settings are presented below.
Information whether the device is the L0 version is displayed during device
start-up.
ENTER
ENTER
NEXT
2 x NEXT
NEXT
4.7 Operation mode
In the PX292-L0 device, the user can change the Cbn operating mode,
which only affects the way of setting the DMX address:
•
8ch – DMX address is set in groups for all channels,
• Adv – the user has at his disposal the DMX address setting:
◦
Seq – sequentially,
◦
ALL – one address for all outputs,
◦ Ind – each output individually.
A detailed description of setting the DMX address can be found in section
4.3.1. Setting the DMX address – L0 version.
NOTE! This parameter is available only in the version with the L0 processor.
19