NOTE! In the device version
L0
, restoring the factory settings is additionally
available from the device menu. Information whether the device is the
L0
version is displayed during device start-up.
ENTER
ENTER
7 x NEXT
NEXT
Pressed ENTER
Reboot
When the display shows the message
YES
, press and hold the
enter
button until the device resets.
4.9.2 Error message
The device is equipped with a built-in memory work control function.
If there are problems with the memory operation on the PX292 display, the
Err
message appears – memory error.
In this situation, select the
enter
key. The device will reload the default
configuration and upload it to the memory. If after this operation, the
Err
message remains on the screen, the memory is permanently damaged and
the unit must be sent to the service point.
23