this menu, select the
RTC Clock
option and confirm the selection twice
with the
enter
button. The screen shown below will appear:
The first option under the
Astronomical Clock
text allows for selecting
which event will be switched on or off according to the clock pre-set. It
can be a selected program and scene, lights or full brightness. Below,
there is an astronomical clock calculated according to the data input
in the
Local settings
menu and the date and time stored by the PX252
driver.
The last two lines on the screen are the manually set time at which the
options described above can be enabled and disabled.
The green and red backgrounds include boxes responsible for turning
on or off a given time at a height at which the given boxes are located.
Keys are used to navigate in the menu. Values are changed after
confirming a selection with
enter
.
•
Last DMX value
– after selecting this option, if the DMX signal
disappears, the driver continues to send its last value
•
Master/Slave mode: Master (Slave)
– in this mode, it is possible to
determine whether the device works as a driver after the controlling
DMX signal entering the driver disappears. This is the co-called Master
16
