•
Master ON/OFF
– information on the master mode status. If turned
on,
Master ON
is displayed; if turned off,
Master OFF
is displayed.
•
T1: N/A (23,4°C), T2: N/A (25,2°C)
– temperature value read from the
sensors connected to the
NTC1
or
NTC2
inputs. If no sensors are
connected, the following message appears
N/A
.
If the cables are incorrectly connected to the driver
joints, an appropriate message will appear on the
screen. To restore the device to work, follow the
instructions on the screen. After disconnecting the
power supply and connecting the cables to the
following joints correctly:
OUT1, …, OUT6
, the device
can be turned on again.
6
Programming device functions
After confirming
Menu
option using the
enter
button, the sub-menu
appears on the screen. To program any of them, after selecting one of them
confirm the selection using the
enter
button. The user will be taken to a sub-
menu screen, where all the available options can be set.
To program an option, select it with the yellow frame visible in the
pictures above using the or keys, and confirm your selection by pressing
enter
.
9
