1
Description
Demultiplexer DMX-512 signal on 0 – 10V.
The PX227 is designed to process the DMX512 signal to control the eight
analog 0 – 10V outputs with accuracy ±3%. The device is manufactured in a
housing designed for installation in electrical switchgear DIN rail T35.
In addition to simple decoding DMX signal the PX227 allows to select the
characteristics of control and program unit reacts to loss of DMX signal.
Individually programmable parameters allow to define independent for
each channel DMX address from range 1 – 512. What is more it is possible to
arbitrarily assign multiple channels to a single address.
2
Safety conditions
PX227 is a device powered by low voltage equal to 12 – 24V DC; however,
please observe the following safety rules during its installation and use:
1. The device mat be connected to 12 – 24V DC with current-carrying
capacity compatible with technical data.
2. All the conductors should be protected against mechanical and
thermal damage.
3. In the event of damaging any conductor, it should be replaced with
a conductor of the same technical data.
4. Only use a shielded cable for connecting the DMX signal.
3
