4
DMX signal connection
PX227 must be connected to DMX line in series. This means
that
DMX IN
terminals in the device must be provided with the
driving cable, and then from
DMX OUT
connector the driving cable
must be provided to other DMX receivers. If PX227 is the last
device in DMX line,
DMX+
and
DMX-
resistor of 120 Ohm between pins 22 and
23.
5
Programming
After switching on, the display shows the version of the program. During
the normal operation of demultiplexer, the display shows only one dot. Press
enter
to go the main menu, the display shows
ALL
. Press
prev
or
next
to select
the programming menu
(
ALL
,
Ind
,
noS
) and press
enter
to confirm.
Navigating the menus:
esc
– exits the currently programmed parameter
without saving changes or takes you to a
higher menu level
prev
– takes to a lower menu lever or reduces the
set values
next
– takes to a higher menu level or increase the set values
enter
– takes to device programming function and confirms the set values
6
120 Ohm
esc
prev
next
enter
