The following typical options (highlighted in black) can be checked:
ź
Supported parameters
- a list of parameter identifiers supported by the device
ź
Parameter description
- description of individual parameters
ź
Device info
- information on the device
ź
Software version label
- information on the device firmware
ź
Identify device
- status of device identification option (on-off)
Additional options (highlighted in blue) are selected by the manufacturer of the device connected
to the DMX line, e.g. lamp.
These are parameters adjusted to the capabilities of the device, and a description of their
functions should be available in the instruction manual of this product.
12
5.2.3. RDM settings
The last tab [
RDM
settings
] contains information on all of the RDM parameters provided by the
RDM protocol to the device. In addition to viewing the messages, it is also possible to set new
values for the options which allow for such a change.
Available parameters are displayed on the right-hand side of the window [
PID - GET/SET
]. The
[
RDM GET
]
key allows you to read their current values, and the [
RDM SET
] is used to enter the
new settings. Once the [
RDM SET
] key is selected, a new window pops up which is used to select
and save settings depending on the option.
Description of colours: black – standard options (RDM); blue – additional optional parameters
supported by the product.
