7
The whole column on the right-hand side of the window, under the “Connected” or
“
Dis
connect
ed
” message, is responsible for searching for and selecting the currently
programmed device equipped with the RDM receiver and thus communicating with the PX218.
On the left, there is displayed information on the currently selected device (highlighted in blue in
the right-hand column). Additionally, through other tabs ([
DMX
Patch G
rid
], [
Sensors
], [
RDM
Settings
]), the user can receive information on the device or change some parameters.
Once the program "PXM RDM Controller” is connected with PX218, it is possible to start
searching for all devices connected to the DMX line. To do this, select [
F
ull
Discovery
] located in
the top left corner of the window. After searching and receiving the response from devices
connected to the DMX line, the program displays the products found on the right in the [
Devices
]
frame.
Using the pop-up keys next to [
SORT
BY
] and [
ORDER
], it is possible to sort and change the
display of the list of the devices found.
5.1.1. Searching for connected devices
