15
SUPPORTED_PARAMETERS,
PARAMETER_DESCRIPTION,
STATUS_MESSAGES,
SOFTWARE_VERSION_LABEL,
DEVICE_INFO,
DEVICE_MODEL_DESCRIPTION,
MANUFACT_LABEL,
DEVICE_LABEL,
DEVICE_HOURS,
DMX_START_ADDRESS,
PERSONALITY,
DMX_PERSONALITY_DESCRIPTION,
IDENTIFY_DEVICE,
SMOOTH_MPID,
SMOOTH_TIME_MPID,
NO_SIGNAL_ON,
SCR_SAVER,
SCENE_CH1,
SCENE_CH2,
SCENE_CH3,
PROGRAM_SPEED,
PROGRAM_FADE,
BALANS_CHANNEL1,
BALANS_CHANNEL2,
BALANS_CHANNEL3,
BALANS_ON,
PWM_FREQENCY,
TEMPERATURE_LIMIT,
TEMPERATURE_THRESHOLD_ON,
TEMPERATURE_THRESHOLD_OFF,
DISPLAY_FLIP,
!
Editable parameter.
The selectable DMX work modes are listed below:
1) RGB mode (see item 9 of this manual) - a value of 1;
2) 2B mode (see point 9) - a value of 2;
3) RGBD mode (see point 9) - a value of 3;
4) The HSL mode (see point 9) - the value of 4;
5) EFFECT mode (see point 9) - the value of 5;
!
DMX_PERSONALITY_DESCRIPTION - description of particular work modes -
PID: 0x00E1
;
!
DEVICE_HOURS - operating time counted in hours -
PID: 0x00E0
;
!
BALANS_RED - value of control level of red chanel balance -
PID: 0x8011
,
Editable parameter.
Minimum value is 0 and maximum is 100 (the value equals to
pecentage of control level). For the maximum value (100) the LEDs work with
maximum brightness. Default value is 100.
!
BALANS_GREEN - value of control level of green chanel balance -
PID: 0x8012
,
Editable parameter.
Similar as in the preceding paragraph only for green channel;
!
BALANS_BLUE - value of control level of blue chanel balance -
PID: 0x8013
,
Editable parameter.
Similar as in the preceding paragraph only for blue channel;
!
SMOOTH_DIS_0/P2P_1/TIM_2 - the choice of options relating to the Smooth function -
PID: 0x801A
,
Editable parameter.
At 0 value Smooth is turned off, for a value of 1
Smooth mode is set to a Packet to Packet (P2P) and for the value of 2 Smooth is in
time mode (TIM-description in 14th point). The default value is 0 - Smooth off;
!
SMOOTH_TIME – Smooth time for TIM function chosen in subsection above -
PID: 0x801B, Editable parameter
. Unit in [ms]. Minimal value of this parameter is
10 and maximal 999 [ms]. Default value is 200.
!
NO_SIG_P1-18|SC_19|ON_20|OFF_21 - choice of work mode for No DMX signal -
PID: 0x801C, Editable parameter. Minimal Value is 1, maximal 21. For values 1-18
menu allows to chose program from 1 to 18 which is played during no DMX signal
detection. For the 19 value a scene saved in memory is set and for the 20 value all
outputs are set to ON with maximum value. The value 21 sets to OFF all outputs
during time with no DMX signal received. Default value is 21;
!
SCENE_RED - settings of red channel value for scene saved in PX282 -
PID: 0x801D, Editable parameter
. Minimal value is 0, maximal 255 (maximal
brightness). By defualt value set to 255;
!
SCENE_GREEN - settings of green channel value for scene saved in PX282 -
PID: 0x801E, Editable parameter
. Similarly as in the subsection above;
!
SCENE_BLUE - settings of blue channel value for scene saved in PX282 -
PID: 0x801F, Editable parameter.
Similarly as in the subsection above;
!
SCREENSAVER_ON/OFF - settings of screensaver (display backlight in PX282) -
PID: 0x8022
,
Editable parameter
. With the 0 value display blanking is not active,
the 1 value means screensaver active. Default value is 0;
DMX_PERSONALITY - DMX working mode -
PID: 0x00E0
,
