background image

Product Introduction

 

This Kit includes a transmitter unit(TX) 

 

and a receiver unit(RX). It allows for the distribution and switching 

 

of high definition video/audio signal by this product and off

-

the

-

shelf   

 

IGMP POE switch. It applied advanced HDbitT technology, the resolution 

 

supported is up to 1080p@60Hz full HD. It can also used in a 

 

point

-

to

-

point connection, the distance is up to 120 meters. It is 

 

widely applied in digital signage advertisement, control room, 

 

command centers, entertainment and exhibition center, safety 

 

monitoring system, etc.

 

 

 

 

 

Product Features

 

1.    Applies advanced HDbitT over IP technology.

 

2.    Resolution supported is up to 1080p@60Hz full HD.

 

3.    Transmission distance is up to 120 meters via CAT6.   

 

4.    Support IR pass back function to control source device from RX location.

 

5.    Offer scalable and flexible input

-

output matrix configuration, allows. 

 

        100 input to infinite output.

 

6.    Support computer control software to select and switch source device input.

 

7.    Plug and play.

 

8.    Support to select and switch source device input from receiver via

 

        remote control and hard button. 

 

9. Support APP control, user can scan, preview, build up their 

 

    configuration by using a phone/tablet easily.

 

 

Summary of Contents for VuMATRIX 1080P-60





















Reviews: