
3. IR use guide
3.1 IR passback
IR blaster extension cable should plug into the IR
-
out port of TX
(Transmitter) of this extender matrix, and the IR receiver extension
cable should plug into the IR
-
in port of the RX (Receiver) of this
matrix extender. The emitter of IR blaster should as close as possible
to the IR receiver window of the signal source device.
3.2 IR remote control
Using the IR remote controller to set/select the channel of this
HDMI Extender Matrix
4.
APP control use guide
4.1HDbitT Matrix Controller MODE
--
APP "Matrix Controller"
4.1 .1Android User: Download the App from our pvisupport site by searching VUMATRIX APP
ANDROID
IOS User: Download the APP"Matrix Controller" from the APP Store.
4.1.2 Firstly, connect the video matrix controller to the IGMP switch.
Then, connect mobile phone/tablet and the video matrix controller via
hotspot
“
matrix
”
with each other (as figure 1 ). At this time, open the
downloaded APP
“
matrix control
”
, will enter to the interface as
figure 2, and APP control starts.
Summary of Contents for VuMATRIX 1080P-60
